新闻资讯

ews center

  • 不锈钢卡套钢管接头是怎么
  • 本站编辑:杭州派跃威流体设备有限公司发布日期:2018-06-07 15:37 浏览次数:

不锈钢卡套式管接头


卡套式管接头是一种新型的管道连接元件,适用于油、气及一般腐蚀介质的管路系统,工作压力16-40PMa。 卡套式管接头的结构主要由具有24゜锥形孔的接头体,带有尖锐内刃的卡套,起压紧作用的螺母组成。旋紧螺母是,卡套被推进24゜锥孔,并随之变形,使卡套的刃口切入钢管并形成环形切槽,从而起到密封作用。由于卡套有弹性,因此可承受较大的冲击,起到防松的作用。这种接头具有如下优点:

1、 结构简单、密封性能可靠、使用方便、制造精良、外形轻巧美观。

2、 不用加垫圈、不用焊接、节省材料、反复装拆性能好。

3、 由于卡套管接头不能焊接,从而减少了管道 杂质对系统性能的影响。因此,卡套式管接头正日益广泛地应用在以油、气、为介质的液压气动设备管道中,特别适用天有燃烧 危险、高空作业和装拆频繁的场合。卡套式管接头

2-1G023155209-51.jpg

Jacket type pipe joint

The sleeve type pipe joint is a new type of pipe connection element, which is suitable for pipeline system of oil, gas and general corrosive medium. Its working pressure is 16-40PMa. The structure of the sleeve type pipe joint is mainly composed of a joint body with 24 tapered holes, a clamping sleeve with sharp inner edges, and a nut composed of compacting functions. To tighten the nut, the sleeve is propelled by 24 tapered holes and then deformed, so that the cutting edge of the card sleeve cuts into the steel tube and forms circular grooves to play a sealing role. Because the card sleeve is elastic, it can withstand larger impact and play a role of loosening prevention. The joint has the following advantages:

1, simple structure, reliable sealing performance, easy to use, well made, light and beautiful appearance.

2, no gasket, no welding, material saving, repeated loading and unloading performance.

3, because the adapter can not be welded, the effect of pipeline impurities on the system performance is reduced. Therefore, the sleeve type pipe joint is widely used in the hydraulic pneumatic equipment pipeline with oil, gas and medium, especially for the occasion of burning danger, high altitude operation and frequent loading and dismantling. Jacket type pipe joint


QQ在线咨询
客服热线
15888823066